Spinners or Integrated mast?

Graham's Coalition Universe stuff

Spinners or Integrated mast?

Postby Graham Kennedy » Sat Dec 08, 2018 3:16 am

We've all seen the radars of old, which look something like this :

Image

Big flat thing, usually on the top of a mast. Well the main active sensor on the Kororra class battleship is the EA-31, which is based on that look :

Image

But times have apparently moved on, and the latest thing is the "integrated mast". This is a roughly pyramidal structure which has radar arrays and other sensors built into it.

Image

The main advantage of this is that 1) you can build the whole thing in a factory somewhere, put all the sensors and stuff together indoors, then ship the entire structure to the shipyard in one piece, bolt it down, plug all the wires in, and you've installed all your sensors in one go. And 2) much of the support equipment for those sensors is inside the pyramid, which has decks in it. Which means crewpersons can access all those systems for maintenance without any of that nasty climbing up masts in the middle of a winter storm.

So I've been playing around with replacing the big billboard sensor on the Kororra with the same concept. Not sure how I like it, though. Maybe I'm just used to how the old system. It certainly does allow for a much larger sensor in the old configuration.

Image

Image

Image
Any thoughts? Which looks better?
Give a man a fire, and you keep him warm for a day. SET a man on fire, and you will keep him warm for the rest of his life...
User avatar
Graham Kennedy
Site Admin
Site Admin
 
Posts: 11120
Joined: Mon Jul 09, 2007 1:28 pm
Location: Banbury, UK

Re: Spinners or Integrated mast?

Postby Mikey » Sat Dec 08, 2018 7:12 pm

Here's my take on both types:

Mast/exposed "antenna" - Looks cooler/has more visible fiddly bits.

Integrated unit - makes more sense.
I can't stand nothing dull
I got the high gloss luster
I'll massacre your ass as fast
as Bull offed Custer
Mikey
Fleet Admiral
Fleet Admiral
 
Posts: 35635
Joined: Fri Jul 27, 2007 2:04 am
Location: down the shore, New Jersey, USA

Re: Spinners or Integrated mast?

Postby Tinadrin Chelnor » Sat Dec 08, 2018 7:36 pm

I like the original looks-wise, but the integrated one seems the more logical. With the integrated one, a crewman could simply climb through and make any repairs necessary.
All I ask is a tall ship, and a star to steer her by.
User avatar
Tinadrin Chelnor
Lieutenant
Lieutenant
 
Posts: 672
Joined: Mon Oct 25, 2010 2:11 am
Location: Potters Bar, Hertfordshire, United Kingdom

Re: Spinners or Integrated mast?

Postby Coalition » Sat Dec 08, 2018 9:38 pm

Spinners have the advantage of lower mass up high, so a waterborne ship is less likely to roll over. You also have greater access to all sides of the radar, vs trying to get at it inside a structure. Replacing it is a matter of just disconnecting the base and wires, and using a crane to lift it off.

Integrated has the advantage of keeping weather off the radar system, reducing wear and tear.

You also have the modern phased array radars that are steered electronically rather than physically, so the flat panels on the tower are the sensors themselves. Often they are placed right next to the CIC where the radar data is displayed and analyzed
Relativity Calculator
My Nomination for "MVAM Critic Award" (But can it be broken into 3 separate pieces?)
Coalition
Lieutenant Commander
Lieutenant Commander
 
Posts: 957
Joined: Tue Dec 02, 2008 3:34 am
Location: Georgia, United States


Return to Coalition Universe

Who is online

Users browsing this forum: No registered users and 1 guest

cron